how to remote into a mac on the same network

Open a port on the router (via 192.168.1.1) to forward traffic from your_web_ip:port to a local_gateway:port Mac->Sys Preferences->Security-> allow your application (e.g.Mac->Sys Preferences->Sharing->Enable “Web Sharing” checkbox.Plus to allow access to the outside world (e.g www), you'll need to forward traffic to your internal gateway:port via your router settings. Since I don't know what application you are running I can't offer any good ideas on that.īasically, from firewall settings you can allow a certain application (e.g. You will need to investigate how to change your application configuration to modify that behavior. If you are unable to connect to your application on the server's real address, that means your application isn't listening on that address. If this is a web app, you should be able to connect via the browser.Now try to connect on your client machine.If it does work, hit ctrl-C to exit the nc session.You should see a message like Connection to 192.168.10.1 3000 port succeeded!.(replace 3000 with the port your application is running on) Verify that you can connect to that address from your server with nc -v 192.168.10.1 3000.Make a note of the address after inet - that should be the address your machine uses. If you mac is on a wired connection that should be en0. One of them is the network your machine is actively connected to. That shows you all the network interfaces on the machine. I'm assuming you are running the webserver on a mac since you tagged your post macosx athough the instructions are similar for linux machines. First you need to determine the ip address or name of the machine you are running the webserver on.

How to remote into a mac on the same network